Thunderbolt Harley Ingleby MOE (Orange)

The MOE mid-length range was designed to have an easy ride and good paddling, while keeping good stability and support.
The bottom is pretty flat with a double concave between your feet, a really good combination for carving turns in a wide board.
Rails are not too thick, for sensitivity, and they transition from neutral round forward through round tucked edge to the fin area and low hard behind the fins.
The rails are foiled from forward of centre toward the tail, for drive through turns and good travel around white water sections.
The Moe range is now available in sizes sub 7 foot!
Opening up one of our favourite boards to the wider surfing community and really blurring the line between the mid length and full performance surfboard markets.
It doesn’t matter what your size, weight or skill level is, there’s most likely Moe to suit.

FINS: Thruster or quad fin setups work well in the Moe.
6’6 – 6’10 the new FCS Harley large mid set is recommended, and the FCS Harley XL quad set is recommended for the 7’2, 7’4 and 8’0 Moe.
Other fin combinations may work well but we’d suggest sticking with medium to large
quad rears that have an 80/20 foil combined with any flat foiled large to XL front fins.

6'6 X 21 1/2 X 2 5/8 X 41L　5 FCS Fin System
6'10 X 21 1/2 X 2 3/4 X 45L　5 FCS Fin System
7'2 X 22 X 2 13/16 X 49.4L　5 FCS Fin System
7'4 X 22 1/2 X 2 7/8 X 52.9L　5 FCS Fin System
8'0 X 22 5/8 X 3 1/16 X 61.2L　4+1 Fin System

SHAPED BY
 Billy Tolhurst   

TECHNOLOGIES

Thunderbolt Technology utilizes advanced materials and technology to decrease weight while enhancing performance, flex characteristics, board control, and durability. Mass-produced epoxy boards are corky and stiff. While light and durable, they simply don’t ride well. But Thunderbolt’s hand-built boards take superior epoxy materials to an entirely different level. These boards provide the feel and sensitivity of a good poly board, but deliver performance far beyond traditional epoxy pop-out constructions. Indeed, those who ride these high-tech epoxy boards claim they actually feel better than polyurethane.

Thunderbolt boards are 100% hand layups. They begin with an EPS foam core with multi-component carbon fiber stringer systems that produce engineered flex and twist for a more lively, responsive performance. Proprietary designs employing internal carbon fiber components are then arrayed in the deck and bottom of the deck for precise flex control and strength.

The core shield PVC provides flexible protection to increase strength and durability without compromising the flex and twist characteristics built into the blank. With ample carbon fiber and fiberglass in the deck, bottom, and rails, these boards both outperform and outlast traditional PU boards and other epoxy designs.

CONSTRUCTION

THUNDERBOLT RED

ALL ROUND

Fiberglass Lamination
Competition Weight & Flex
Hand-Crafted